INFLUENCE OF SPARGER GEOMETRY ON THE FORMATION OF SMALL-SIZED BUBBLES USING PULSED GAS FLOW

- 106652
Pôster
Favorite this paper
How to cite this paper?
Abstract

In the present work was evaluated the pulsed gas flow in order to improve the gas distribution in three different spargers and to decrease the diameter of bubbles formed. It was possible to confirm that the geometry of the sparger is an important point of studying to get small-sized bubbles since, for the same operation conditions, only the wing-type sparger showed an increase of 46.0% in volumetric oxygen transfer coefficient (kLa) operating with pulsed flow compared to the conventional flow of air. This result justifies future studies regarding the development of new spargers for small-sized bubbles generation.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Programa de Pós-Graduação em Engenharia Química / Departamento de Engenharia Química / Universidade Federal de São Carlos
  • 2 Departamento de Engenharia Química / Universidade Federal de São Carlos
Track
  • 4. Modeling, Instrumentation, and Control of Bioprocesses
Keywords
Bioreactor
Spargers
Pulsed Flow Rate
Small-sized Bubbles
Volumetric Oxygen Transfer Coefficient