DIFFERENT FORMS OF PROCESS CONDUCTION AND THE INFLUENCE ON THE PHYSICO-CHEMICAL CHARACTERISTICS OF “CACHAÇA”

- 106629
Pôster
Favorite this paper
How to cite this paper?
Abstract

The work had the aim of studying a biotechnological process for the production of “cachaça”. For this, two different processes was conducted, where three ways of recovering the fermented were evaluated. The process kinetics and the physicochemical characteristics of the obtained distillates were also studied. The kinetics was monitored through the analysis of substrate concentration and ethanol, which allowed the determination of yield, efficiency and productivity of both fermentation processes. After the three forms of recovery were carried out for the batch and fed batch system, the chosen form of recovery was the use of fermented must without decanting before distillation. The simple batch system showed values for alcohol production of 45.26 g/L of fermented must, productivity 2.06 g/L.h and efficiency of 80%. For the fed batch system, alcohol production was 47.83 g/L of fermented must, productivity 2.17 g/L.h and efficiency of 80%. All the samples of “cachaça” analyzed presented values of acidity, higher alcohol formation and aldehydes within the parameters established by the Brazilian legislation. From the results obtained, it was possible to identify that the discontinuous process fed without decantation can be used for the production of “cachaça” at different production scales.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Universidade Federal do Rio Grande
Track
  • 3. Biotechnology in Food, Beverages and Cosmetics Production
Keywords
ALCOHOLIC BEVERAGE
simple batch
fed batch system