To cite this paper use one of the standards below:
The objective of this work was to evaluate the application of different percentages of whey permeate in beer production. The processed musts were hydrolyzed with 0.75 g / L of the enzyme lactase at 40 ° C and pH 6. The fermentation occurred in a 6 L volume bioreactor by Saccharomyces cerevisiae for 104 hours at 40 ° C and pH of 5.6. biomass), evaluating the substrate consumption, product formation (ethanol) and pH. With the results, it was possible to observe that the highest alcohol content was 50 g / L for the 50% permeated wort and the lowest value was 40 g / L for the 0% wort. The alcohol yield for all samples was 78.39%. The degree of fermentation increased with the addition of the permeate from 66.67% to 71.88% in the permeated samples of 0% and 50%. The addition of permeate was very promising, being an adjuvant of low cost and containing high fermentable sugars. The permeate aided in the fermentation without damaging the ethanol yield, the beer had no defects and the best result was that of 50% permeate resulting in a strong, dark, alcoholic beer (6.1%) and can be marketed as such.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper