60171

Metodologia para a caracterização de sistemas sensores termais

Favoritar este trabalho

This paper presents a methodology developed for the calibration of thermal infrared cameras in laboratory conditions. It allows the characterization of these sensor systems, verifying its capacities and limitations to optimize its operational use, and checking the results against technical information delivered by its manufacturer. This analysis consists on the verification of the radiometric, spectral and spatial qualities and limitations of these sensors. The radiometric characterization allows the establishment of a relation among radiometric values measured by the camera and the incoming radiant flow. For the spectral distinction of the system, two sets of measurements were made. At the first one, double determinations were made at 6,500 and 14,000 nm, with a 100 nm interval, resulting in 76 different wavelengths. At the second one, a set of measurements was done, using a reference sensor (Judson). Both sets of measurements were made at the same experimental arrangement and similar wavelengths. As for the spatial characterization of a sensor, it permits to know its capacity to “see” and keep the geometric integrity of an object on the Earth surface, and it is determined by its spatial resolution. To test the methodology, the OPTRIS PI450 sensor was used, whose informations on calibration parameters and spectral response function were available.