Goniômetro para medições de BRDF e emissividade de materiais de interesse em SR
In this paper, we present the goniometer by LaRaC (Laboratório de Radiometria e Caracterização de Sensores Eletroópticos), which is a device capable to measure the spectral Bidirectional Reflection Distribution function (BRDF) and the emissivity of usual materials in remote sensing researches. The goniometer was projected to be used with a light source and a spectroradiometer, consisting in a electro mechanic assemble. The device structure is subdivided in: a sensor arc; a light source-supporting arc; a ring and a sample holder, each one attached to automated motors. In a default setup, the distances from the sample, with 30 cm maximum diameter, to the sensor and the light source are 100 cm and 120 cm, respectively. Radiometric data, necessary to estimate the BRDF, may be collected either in automatic mode, by the automated control of the motors, or in manual mode by an operator. In automatic mode, a typical BRDF data collection, concerning to 15 degrees of resolution in the angular positioning of all structures, takes approximately 60 hours involving all possible geometries. We also present the first characterization of a surface, using a reference panel, with the objective to verify the azimuthal and zenithal angular configurations in which construction issues would induce shadow casting on the sample.