Para citar este trabalho use um dos padrões abaixo:
In this work we propose a simple, low cost and “green” route for preparation of Three-dimensional graphene based materials filters (3D-rGO) for heavy metal removal from water. 3D-rGO nanofilters where obtained from the reduction of graphene oxide (GO) under very specific conditions. A flow-directed assembly was used to assemble GO sheets into layered films. In this procedure, aqueous GO dispersions were filtered through a porous membrane. After these procedures the films were peeled off from the membranes. The freestanding GO layered films were put into a flask with the reducing agent solutions (ascorbic acid). Each flask was then sealed in a stainless steel autoclave and heated in different conditions. After this, the 3D-rGO nanofilters obtained were washed with deionized water and dried at 60°C. The nanofilters were characterized by SEM, XRD, Raman and FTIR spectroscopies. Simple reaction variations promoted significant morphological changes (including pore size distribution). Controlling the synthesis parameters was possible to modulate the adsorptive properties of the 3D-rGO nanofilters. In other words, was possible to make it more selective to certain types of metal ions. Atomistic Molecular Dynamics simulations were employed to analyze the blockage and adsorption properties of a membrane composed of three layered porous graphene The theoretical results indicates that the membrane is able to block and adsorb more than 90% of the monovalent and divalent cations and 100% of the trivalent cations regardless the simulated opening in the sheets, corroborating experimental data.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo