Para citar este trabalho use um dos padrões abaixo:
The present work reports the development of a process to produce highly surface starch aerogels for the impregnation of green coffee oil. The strategy presented here is based on a novel method for drying hydrogels in supercritical carbon dioxide (scC02} without using alcogel traditional step. The drying step was performed using a mixture of scCO, and ethanol which was pumped through a high-pressure flow cell. The best drying conditions were achieved at 200 bar and 40ºC using 2 ml/min of C02 with 5% of ethanol during 5 hours. The obtained materiais exhibit a surface area of 96 m3/g which is in line with the best starch aerogel obtained through the traditional alcogel approach. These materiais were further impregnated with ibuprofen in scC02 in arder to develop an integrated process between drying and impregnation.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo