Para citar este trabalho use um dos padrões abaixo:
Sulfur 1 s TEY and FY NEXAFS spectra of GOPEDOT: PSS 5% are shown in Figure 1. These spectra were measured at the soft X-ray spectroscopy (SXS) beamline of the Brazilian Synchrotron Light Laboratory (LNLS), Campinas, São Paulo. These spectra show two main absorption peaks. The first one which is composed of two features corresponds to the overlapping of the S 1 s ----> n * and S1s----> a* transitions in PEDOT at 2472 and 2473.2 eV, respectively. The higher intensity peak corresponds to sulfur 1 s transitions in PSS. A strong angular dependence for PEDOT at both transitions, especially at the S1s ----> n *, in cooled and not-cooled samples, can be observed, which is more intense in the FY mode. At normal incidence, the intensity of the S1 s ----> n * transition is higher, indicating that the PEDOT unit is preferably oriented perpendicular to the substrate surface. For PSS the corresponding peak (at 2479 eV) shows weak polarization dependence. The core-hole clock (CHC) method was employed to calculate the charge transfer time (-cCT) from the ratios of the spectators and normal Auger signals using the sulfur core-hole lifetime of 1.27 fs [4] as an internai reference clock. From the CHC method it was possible to show that the GOPEDOT: PSS 5% blend has the lowest charge transfer time in comparison with other GOPEDOT: PSS blends. As a conclusion, the reduction of -ccT leads to higher electron mobility, which means that the electron delocalization dynamics of PEDOT:PSS (5%) film is enhanced by the presence of the graphene oxide. This result is in complete agreement with electrical tests performed for the GO-PEDOT:PSS blends.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo