Determination of 16 Carbonyl Compounds in Mineral Water

- 87337
Pôster
Favoritar este trabalho
Como citar esse trabalho?
Resumo

Carbonyl compounds (CCs), like formaldehyde and acrolein, are recognized as highly toxic pollutants, especially when present in the air, food or beverages. (CCs) can be characterized and quantified by addition reactions with nucleophilic reagents. The most used reagent for characterization and quantification of CC is 2,4-dinitrophenylhydrazine (2,4-DNPH), forming the respective hydrazones (base de Schiff)1 (Figure1). The mineral water market is one of the fastest growing branches in the sector of non-alcoholic beverages. The water is exposed to contaminants from different sources and, for bottled water, the material by which the bottle or container is produced can be a source of contamination of different classes of substances such as carbonyl compound. On the other hand, the quality and origin of the carbon dioxide used in the gasification, can be sources of contamination by different classes of substances, such as CC. The main objective of the present work was to develop a new analytical methodology to quantify CC in samples of mineral water, carbonated or not, commercialized in the city of Salvador-BA. The CC analyzes were performed using a Shimadzu Ultra Fast Liquid Chromatograph (Series 21398), equipped with a MS detector. For the analysis, a previous purification of the 2,4-DNPH (1 g) was performed through Liquid-Liquid Extraction using 120 mL of acetonitrile and 78 mL of water. Thus, a 2,4- DNPH solution with concentration of 0.5% was obtained. The CC were derivatized by reacting 100 mL of mineral water (acidified by addition of 5 drops of HCl) with 20 mL of 2,4-DNPH 0.5%, under sonication (20 min) and then passed throughout a C18 SEP PAK cartridge. The elution was done using 2 mL of Acetonitrile. The hydrazones (Formaldehyde, Acetaldehyde, Acetone, Acrolein, Propionaldehyde, Crotonaldehyde, Metacroline, Isobutyraldehyde + Butyraldehyde, Benzaldehyde, Cyclohexanone, Valeraldehyde, Tolualdehyde + M-Tolualdehyde, Hexaldehyde, Heptanal) were separated in 16.5 min and 15 CC were quantified in the water samples studied. Formaldehyde, acetaldehyde, acetone, valeraldehyde and benzaldehyde were found in all studied samples. The highest concentration determined was 3.50 ppb (acetaldehyde). For example, the concentration range determined for acrolein and formaldehyde were 0.01 ppb - 0.44 ppb and 0.44ppb– 1.23 ppb, respectively. Comparing carbonated and non carbonated water, for most of the CC studied we observed no significant differences in the measured concentratations. Nevertheless, for acrolein, for example, the measured concentratios in carbonated water was, on average, 3.8 times higher than that measured in non carbonated waters. The analytical methodology developed is comprehensive, precise, accurate and suitable for use in the studies o water quality.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 UFBA
Eixo Temático
  • BEA - Alimentos e Bebidas
Palavras-chave
Mineral Water
Carbonyl Compounds
UFLC