Para citar este trabalho use um dos padrões abaixo:
Corn stalks is the residue generated after corn (Zea mays L.) is threshed and presents adsorptive properties and water decontamination capacity.1 In this study, assays varying the granulometry (50, 100 and 200 mesh), pH (2 to 10), agitation time (30 and 60 minutes) and chromium (VI) concentration (0.25 to 2.0 mg L-1) were performed to verify the best adsorption conditions of this heavy metal. UV-Visible Spectrophotometry method was used to determine the presence of Chromium (VI) in aqueous solution in the form of oxyanions.2 The biomass was dried crushed and subsequently grinding and separated using a mechanical sieve. The results showed that adsorbent particles of 100 mesh, aqueous solution of chromium (VI) with pH 6.0 and contact time of 30 minutes, are acceptable conditions to carry out the adsorption isotherm construction tests. The percentage of removal was greater than 84% (Figure 1). The Freundlich and Langmuir isotherms did not show good results and a nonlinear model allowed a better evaluation of the experimental curve (Figure 2). The convex shape of the curve indicates an unfavorable isotherm due to the low removal capacity at low concentrations. The Sips linearized isotherm was also constructed and it was possible to calculate the maximum adsorption capacity (Qmax = 0.198 mg g-1), the Sips constant (KS = 15.055 L mg-1), the Gibbs Free Energy (Go = 6.72 kJ mol-1) and the parameter value that measures the degree of heterogeneity (n = 0.18). Finally, we conclude that this is an exergonic adsorption physical process (25oC) and as Brunauer can be classified as Type III or according to Giles class S and subgroup 1. 3
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo