Para citar este trabalho use um dos padrões abaixo:
Carbon nanotubes (CNTs) represent an important class of nanomaterials with attractive use due to their physical, chemical, electrical and mechanical properties. This nanomaterial can be obtained by different processes using metallic catalyst (the most common are Co, Fe, La, Ni or their combinations). Even using a purification step, metals can be present in the final material at relatively high levels, affecting the properties of CNTs.2,3 To determine these contaminants, sample preparation using wet acid digestion for elemental determination by plasma-based techniques is the most common approach. However, hard conditions of pressure and temperature with concentrated acids are required. Based on the recent developments in sample preparation, alternative approaches are proposed in this work. Microwave-assisted wet digestion (MAWD) is studied for further determination of metals by ICP-based techniques (ICP-MS and ICP-OES). Suitable conditions, such as irradiation time (30 to 65 min), CNT mass (25 to 175 mg), the volume (6 and 15 mL) and the concentration of the digestion solution (0.5, 1, 3 and 14 mol L-1 HNO3), the influence of the air flow-rate on digestion temperature, the microwave power, the use of UV lamps and the use of oxygen and H2O2 as auxiliary reagents were evaluated. The accuracy was evaluated by comparison of the results with those obtained using neutron activation analysis (NAA) and also by high resolution continuum source graphite furnace atomic absorption spectrometry with direct solid sampling (DSS-HR-CS-GF AAS).
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo