Para citar este trabalho use um dos padrões abaixo:
Recently, human activities have contributed to environmental pollution, such as wastewater contamination by heavy metals and dyes. Therefore, it is necessary to treat effluent before its discharge into the environment. Among numerous technologies, the adsorption process is a promising alternative by its operability, economical feasibility, wide availability and simplicity of design. Lignin is a natural polymer containing diverse functional groups and it is useful as an inexpensive adsorbent material with low toxicity. The aim of the present study is to investigate the adsorption of single metal ions or dye aqueous solutions on Kraft lignin, which was obtained from a paper mill provided by Suzano Pulp and Paper Company. Parameters that affect the adsorption process, such as pH, contact time, initial metals/dyes concentration, and adsorbent dose were optimized. By using a microtube with the addition of 30 mg of Kraft lignin to 1.5 mL of one metal solution (Au, Co, Cu, Cr, Ni, Pb, Pd e Zn) or dye solution (Reactive Blue 19, Reactive Blue 21), pH was adjusted to pH 7.0 and were stirred at 25 ºC for 12 hours (metals) or 4 hours (dyes). After, the solution was separated and the metals/dyes concentration was determined. Figure 1 shows the percentage of the analytes removal in the optimized condition. The amount of metals and dyes adsorbed was higher than 75% and 92%, respectively. These results show how promising is the use Kraft lignin for real effluent samples application. In addition to experimental data were applied isotherm and kinetic models.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo