Para citar este trabalho use um dos padrões abaixo:
Surfaces termed “SLIPS” (Slippery Liquid-Infused Porous Surface) present quite singular properties, for instance, self-healing and self-cleaning, which make them very promising for a broad range of applications in so diverse fields such as medical, avionic, oil and gas industries, among others. SLIPS are designed surfaces with controlled wettability based on the embedding of a lubricant non-polar fluid into textured or porous materials having the ability to repel aqueous and/or oily liquids. Considering that scaling is a crucial problem in many industrial facilities, in this work the anti-scaling ability of textured copper-based SLIPS was evaluated. Texturing of copper plate (2.0 x 3.0 x 0.2 cm) was achieved by oxidation with 2.0 M NaOH solution during 24 hours followed by intensive washing with deionized water. The textured material was modified by thiolation (perfluorodecanothiol 5 x 10-3 mol L-1 in ethanol, during 24 h), then impregnated with the perfluorinated oil Krytox to produce the SLIPS. The water contact angle with the thiolated-copper and the SLIPS surfaces were 150o and 116o, respectively. Both surfaces were submitted to scaling tests by immersion into calcium carbonate supersaturated brine and were assessed by scanning electronic microscopy (SEM) and/or atomic force microscopy (AFM). AFM images of the CaCO3 deposited onto these materials (Figure1b;1d) showed that the number of nucleation sites onto the SLIPS surface decreased when compared with the thiolated surface: only one crystal can be seen in image d; other bright spots are part of the textured-surface.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo