Para citar este trabalho use um dos padrões abaixo:
The functionalization of multi-walled carbon nanotubes (CNT) via acid oxidation is a relevant strategy to increase their adsorption capacity, especially for polar adsorbates. These treatments generate oxidized fragments (debris) adhered to the CNT, which is not removed by simple washing. Unfortunately, most of the papers do not mention any purification procedure for the removal of debris and therefore the adsorption data are inaccurate. Here, we study the effect of the debris on the adsorption of methylene blue (MB). Three CNT were used: pristine (p-CNT), oxidized (ox-CNT), and ox-CNTs after removal of debris (@-CNT). The procedures used to obtain ox-CNT and @-CNT were previously reported.1,2 Elemental analysis show that the acid oxidation increases the oxygen content from 0.15 (p-CNT) to 13.9% (ox-CNT). For @-CNT, this content was reduced to 7.7%. Deconvolution of the XPS data show that 13% of the oxygen of ox-CNT originates from carboxylic acids (-COOH) and 87% corresponds to alcohols, ethers and lactones, while @-CNT has only 3% of carboxylic groups. These differences in surface chemistry affect the adsorption as summarized in Table 1. In neutral and basic medium, @-CNT has higher affinity (KL) and Qe values than ox-CNT. This is due to the conversion of –COOH to carboxylates on the debris. This causes their desorption from CNT and a decrease in the MB adsorption on ox-CNT. Therefore, these data show how debris influences the adsorption of functionalized CNT, reducing by up to 38% depending on the pH.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo