Aproveitamento Energético do Glicerol Bruto em Misturas com Bio-Óleo Pirolítico

Vol 11, 2022 - 159492
Pôster
Favoritar este trabalho
Como citar esse trabalho?
Resumo

Glycerol, a by-product of biodiesel production via transesterification, has been presented as a significant residue due to the continuous growth in biodiesel production, making the management and use of this residue of vital importance. The use of glycerol in fuel mixtures has shown to be a viable possibility for its reuse as a source of energy. This work investigates the energy potential and feasibility of using glycerol in mixtures with pyrolytic bio-oil, renewable fuel produced from biomass. For the purposes of greater control and reproducibility, the work was conducted using a synthetic bio-oil, in which glycerol proved to be completely miscible. Initially, the effect of several impurities commonly present in crude glycerol (water, soap, NaCl and NaOH) on the miscibility of the system was evaluated. Among the contaminants evaluated, it was observed that soap (sodium oleate), depending on its concentration in glycerol, can affect the miscibility of the system, characterized by turbidity. The isolated effect of these impurities on some properties of the mixtures, notably density at 20°C, kinematic viscosity at 30°C and viscosity index (IV), used for the purpose of evaluating the stability of the mixtures through the accelerated aging of the samples, was also evaluated. In all mixtures, the glycerol/bio-oil ratio used was 0.2:1 and the contaminants were added directly to the glycerol. An increase in the concentration of NaCl and NaOH tends to cause a slight increase in the density of the mixture, while an increase in the content of soap and water causes a slight decrease. Except for the water content, which promotes a considerable reduction in the viscosity of the mixtures, the other contaminants have little influence on this property. Based on the viscosity index, the only contaminant that tends to reduce the stability of mixtures is NaOH, leading to an increase in IV with increasing concentration. For the other contaminants, a reduction in the value of this index was observed. Four standard formulations of crude glycerol containing water, NaOH and Soap as contaminants in different proportions were mixed with bio-oil at a ratio of 0.18:1 (glycerol/bio-oil). The stability of the mixtures was evaluated using the viscosity index as a parameter and it was found that the combined presence of contaminants in the crude glycerol did not lead to an increase in this index in relation to the value obtained for the pure glycerol/bio-oil system, indicating the possibility of using crude glycerol, without previous treatment, in fuel formulations with pyrolytic bio-oil.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Universidade federal do Maranhão
Eixo Temático
  • Refino, Tecnologias do Gás Natural, Petroquímica e Biocombustíveis
Palavras-chave
Glicerol
Bio-Óleo Pirolítico
Produção