To cite this paper use one of the standards below:
Electrospinning of bacterial cellulose coatings biomineralized with strontium apatite for bone regeneration
Ana Soares
Universidade Federal do Ceará - UFC
Now you could share with me your questions, observations and congratulations
Create a topicIntroduction: Bone problems are becoming more common. Fractures are examples of these problems, whether due to accidents or diseases that affect bone density, such as osteoporosis. Implants, usually made of titanium alloys, are used to treat these problems, but these materials are inert, presenting the lowest possible response to the host. Objectives: The objective of this work is to produce a coating that, in addition to mimicking the characteristics of bone tissue, also confers bioactivity to the implant. Methods: A bacterial cellulose coating was produced from the electrospinning process, later biomineralized with strontium apatite (SrAp) by the biomimetic method using a simulated body fluid solution with modification in its composition (calcium was replaced by strontium). The solution and process parameters were studied to identify a better formulation for producing the coating. The resulting materials, before and after biomineralization with SrAp, were evaluated for their morphology by means of scanning electron micrography (SEM) and were chemically analyzed using Fourier transform infrared spectroscopy (FTIR). To investigate its effects in contact with bone cells (mouse osteoblasts MC3T3-E1 Subclone 14) and cells present in the healing process (mouse fibroblasts L-929), in vitro cytotoxicity assays were performed by the indirect method using resazurin. Results: Morphological analysis showed the formation of nanofibers with a minimum diameter of 54 nm for both cases; maximum of 380 and 570 nm; and average of 180 90 nm and 230 60 nm, for coatings before and after biomineralization, respectively. With the chemical analysis, it was possible to observe that, in addition to the characteristic bands of cellulose, there was a change in the structure of the biomineralized coating with SrAp, showing the appearance of the asymmetrical elongation C=O referring to the carbonate group (CO32-), indicating the presence of Ap and carbonated SrAp. The cell viability analysis showed that, for both cases, there were no cytotoxic effects, with an increase in cell viability over the days of contact with the extract, especially with the biomineralized ones. This result can be explained by the effect of SrAp, which induces an increase in cell viability, due to its potential as a cell growth stimulant. Conclusions: These preliminary data show that the coatings produced presented important characteristics in the production of scaffolds, such as bioactivity and high cell viability, demonstrating great potential to be used in the regeneration of bone tissue.
Tainara Costa
What is the purpose of replacing calcium with strontium in simulating body fluid solutions?
How were the process parameters defined for the analyzes carried out? Did they come from any previous study?
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper
Ana Soares
I apologize for not making the purpose clear, but according to the literature consulted, strontium promotes the differentiation of human mesenchymal stem cells (MSCs) and increases bone formation in vivo through the Wnt/beta-catenin signaling pathway, which regulates several phenomena, including those related to cell differentiation, polarization and migration. Strontium is capable of increasing the action of osteoblasts while reducing the action of osteoclasts. We already have published research using this biomineralization mechanism "https://doi.org/10.3390/coatings11080908".
The process parameters were defined based on literature studies and experimentation. The study is ongoing and these points will be addressed in the thesis and article.