Para citar este trabalho use um dos padrões abaixo:
The potential of additive manufacturing, particularly fused deposition modeling, has been increasingly explored in the field of electroanalysis [1]. Herein, the electrochemical behavior of secnidazole (SCZ) was investigated using additive manufactured electrodes obtained from conductive filaments based on carbon black and polylactic acid. After chemical/electrochemical activation (+1.4V/200s and -1.0 V/200s in 0.5 M NaOH), SCZ was analyzed using square wave voltammetry under optimal conditions (amplitude: 40 mV, step: 5 mV and frequency: 40 Hz) and using 0.12 M BR buffer (pH =2.0) as supporting electrolyte, showing high precision (RSD < 3.8%) and excellent linearity from 2.5 to 250.0 µmol L⁻¹ (r² = 0.998), with LOD and LOQ of 0.25 and 0.82 µmol L⁻¹, respectively. The proposed method was successfully applied to quantify and identify SCZ in pharmaceutical and seized samples, yielding results statistically equivalent (95% confidence level) to those obtained by HPLC (Fig. 1)
|
|
Figure 1. HPLC chromatograms detected at 321 nm (left) and the corresponding SWV scans (right) for standard (black line) and seized sample (red line) solutions. |
These results lead us to conclude that homemade 3D-printed electrodes enabled accurate and reproducible measurement of SCZ concentrations in both pharmaceutical and seized samples.
Agradecimentos. CAPES, Fapemig, INCTBio, CNPQ, UFU.
Referências: [1] Stefano, S. J. et al., Microchimica Acta, 189, 414 (2022); [2] Nyirjesy, P.; Schwebke, Future Microbilogy, 13, 507 (2018).
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo