Para citar este trabalho use um dos padrões abaixo:
3D printing has been employed for the development of miniaturized electrodes using polymeric filaments containing conductive materials [1]. This possibility of miniaturization is valuable in the pharmaceutical industry, as there is a growing demand for more compact analytical instrumentation [2]. The treatment of Parkinson’s disease relies on the administration of levodopa and carbidopa. Thus, it is essential to develop new analytical tools for simultaneous determination of these species. In this work, it was proposed the use of 3D-printed electrodes, made from polylactic acid (PLA) and carbon black filaments, deposited in an acrylonitrile butadiene styrene (ABS) substrate. For the selective removal of non-conductive PLA at the electrode surface, electrochemical activation was optimized in 1.0 mol L−1 NaOH for 30 min at a potential of +1.2 V. Electrochemical impedance spectroscopy indicated the decrease of the resistance of charge transfer at the electrode after surface treatment. In cyclic voltammetry, levodopa exhibited an oxidation and a reduction peaks, while carbidopa displayed two sequential oxidations peaks. Levodopa oxidation and first carbidopa oxidation peaks overlapped. Therefore, differential pulse voltammetry was selected and optimized to preserve the reduction of levodopa. Under optimized conditions, calibration plots for simultaneous determination of levodopa and carbidopa were established in 0.1 mol L-¹ Britton-Robinson buffer (pH 2.0), in the range of 0.2 to 200 µmol L–1 for the two species. The 3D printing electrodes were used in drugs used for the treatment of Parkinon’s disease and in residual waters.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo