Modeling Sludge Deposition in Petroleum Storage Tanks Under Mixing Conditions: A CFD-DPM Approach

Vol. 5, 2025 - 326598
Pôster
Favoritar este trabalho
Como citar esse trabalho?
Resumo

This study investigates the patterns of sludge deposition in a petroleum storage tank induced by the flow promoted by a high-efficiency marine impeller, using a Computational Fluid Dynamics approach coupled with the Discrete Phase Model. The simulation replicates the flow induced by the impeller, operating at 420 rpm with a 10° inclination, using Ansys Fluent 2024R2. The turbulent flow is modeled using the Reynolds-Averaged Navier-Stokes equations together with the komega SST turbulence model. Uniquely, the DPM is then employed to predict the particle trajectories and deposition patterns, providing indicative results on the spatial distribution of particle accumulation at the bottom of the tank. This approach provides a novel application of CFD-DPM in the context of petroleum tank sludge modeling. The results indicate localized deposition zones below the impeller and near the tank walls, highlighting the influence of the flow recirculation patterns.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Universidade Estadual de Campinas - UNICAMP
  • 2 Petrobras (Brasil)
  • 3 Faculdade de Engenharia Química - Unicamp
  • 4 AI4Tech
Eixo Temático
  • Simulação, Otimização e Controle de Processos
Palavras-chave
CFD
Sludge
Storage Tank
Particle deposition
Mixing