Computer Simulation for Hydrogen Production from the Steam Reforming of Toluene
Hydrogen is an important material for the chemical, petrochemical and petroleum refining industries and it is a clean fuel that can be used in fuel cells and internal combustion engines. The main processes for hydrogen production are currently the catalytic steam reforming of methane, catalytic steam reforming of toluene, partial oxidation of heavy oil residues, biomass and coal gasification. In the present study an one-dimensional dynamic non-isothermal model has been developed to simulate the catalytic steam reforming of toluene to procedure hydrogen. A catalytic fixed bed reactor (CFBR) was used to study the reforming process of toluene. This work has as objective the hydrogen production. So, we have been performed a sensitivity analysis in relation to H2 and CO using as test the input flow (Qg) of the gas phase to check the production between H2 and CO by comparison. Results shown an increase for H2 when the Qg is increasing.