PERFORMANCE OF A FIXED-BED COLUMN IN THE REMOVAL OF POLYSTYRENE MICROPLASTICS: A RESPONSE SURFACE METHODOLOGY STUDY

Vol. 5, 2025 - 325124
Apresentação Oral
Favoritar este trabalho
Como citar esse trabalho?
Resumo

Microplastic pollution has become a growing environmental concern, mainly due to the ability of microplastics to adsorb micropollutants and release toxic additives into the environment. Wastewater treatment plants (WWTPs) are one of the main sources of microplastics that reach marine environments. Therefore, it is necessary to evaluate complementary treatment methods that can be integrated into conventional WWTPs, including fixed-bed columns. This study evaluated the removal efficiency of polystyrene microplastics using commercial granular activated carbon in a fixed-bed column. Using Response Surface Methodology (RSM), the influence of bed height, flow rate, and inlet concentration on removal efficiency was assessed. Experiments were conducted in an upward-flow glass column. The adsorbent material was characterized by SEM, FTIR, and PZC analysis. The results indicate behavior consistent with physical retention mechanisms, with better performance at lower flow rates, moderate concentrations, and higher bed heights, which explains the low statistical significance of the individual factors evaluated. However, complementary experiments are recommended to deepen the understanding of the mechanisms involved and improve the model.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Universidade Federal do Ceará
Eixo Temático
  • Engenharia Ambiental e Tecnologias Limpas
Palavras-chave
Microplastics
Adsorption
Removal efficiency
Fixed-bed column