This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/cics-2023-177760
If you've NEVER registered a DOI in your Lattes, check our tutorial!This article presents a case study on harmonic distortion in a Commercial Consumer Unit (UCC), based on measurements carried out in a bakery located in Teresina - PI, with the intention of diagnosing the present harmonic content, evaluating whether it is within acceptable limits and point out the possible causes and consequences of the analyzed harmonic distortion. The measurements were performed using the DMI F200R v2 Extra lite meter, obtaining the distortion parameters and comparing them with the limits established by national and international recommendations. It was found that the harmonic voltage distortion is within the limit regulated by the National Electric Energy Agency (ANEEL), however, the total current distortion levels of all phases exceeded the limits recommended by the Institute of Electrical and Electronic Engineers (IEEE ) Standard 519, mainly phase C, with a strong presence of odd order harmonics, in addition to phase unbalance.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper