Para citar este trabalho use um dos padrões abaixo:
Adsorption-based CO2 separation uses porous solids (such as zeolites or activated carbon) packed in a column to selectively capture CO2, which is later released through cyclic processes such as temperature or pressure swing. Accurately modeling breakthrough curves is crucial for maintaining efficient process operation and optimizing separation. In this work, the main objective was to evaluate the effect of equilibrium adsorption models on the calculation of the CO2 breakthrough curve of a flue gas (CO2+N2) in a zeolite 13X-packed column considering mass, momentum and energy balance. Mass transfer resistance was calculated with the LDF model. To calculate the adsorption capacity at equilibrium, three equilibrium models were evaluated: Langmuir, SIPS, and IAST-SIPS. The LDF and equilibrium models were fitted to data from the literature for pure gases. The CO2 breakthrough curve was then predicted using the column model, and the results were compared with available data. The calculated CO2 breakthrough curves predicted the qualitative effect of CO2 adsorption, but the column saturation time was longer than the experimental data indicated. To reduce the saturation time, up to two adjustable parameters were used to weight the effect of the equilibrium model and axial dispersion in the calculated results. After the fitting procedure, the column model correlated well with the experimental data, regardless of the equilibrium model used. The adjusted values indicate that the adsorption capacity at equilibrium directly affects the breakthrough curve and that its value had to be lower than the reference equilibrium data used in the model calibration to successfully represent the breakthrough curve.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo