EFFECT OF MILLING METHODS OF COMMON WHEAT (TRITICUM AESTIVUM) FOR WHOLE-GRAIN FLOUR PRODUCTION ON COOKING QUALITY OF WHOLE GRAIN PASTAS

Favoritar este trabalho
Como citar esse trabalho?
Detalhes
  • Tipo de apresentação: Pôster
  • Eixo temático: Processamento de Alimentos
  • Palavras chaves: Cereals; Fibers; granulometry;
  • 1 Universidade Estadual de Campinas, Faculdade de Engenharia de Alimentos
  • 2 Universidade Estadual de Campinas

Por favor, faça o login para assistir o vídeo

Entrar
Resumo

There are no established milling methods of wheat for whole-grain pasta production, differently from that occurs for refined-wheat-based pasta. However, the characteristics of the raw materials are determinant and could bring technological problems for the whole-grain pastas, mostly during its cooking. In countries where Triticum durum is not produced, like Brazil, the T. aestivum variety is the most used for whole-grain pastas formulation. This study produced and evaluated whole-grain flours made by distinct milling methods, used these flours as raw materials for the production of whole-grain pasta of two different shapes (short, and long), and evaluated the cooking quality of these pastas. Three whole-grain flours were produced by different methods (WF1, by reconstitution of fractions from roller mill; WF2, by direct milling in knife mill, and a roller mill breaking system; WF3, by direct milling in a knife mill, and roller mill breaking and reduction systems). It was evaluated the nutritional composition (moisture, protein, ash, lipids, and total carbohydrates), color, and fineness modulus of the produced flours. The short, Fusilli-type (FU1, FU2, and FU3), and long Fettuccine-type (FE1, FE2, and FE3) dry whole-grain pastas were made by cold extrusion, only with WF1, WF2, and WF3, respectively. The cooking quality parameters of the whole-grain pastas (firmness, water absorption, and loss of solids) were analyzed and compared. Data were evaluated by variance analysis (ANOVA) and Tukey's test (p<0.05). Results: The modifications of milling processes did not cause differences in the composition of the whole-grain flours but affected their fineness modulus and color. It was not verified significative differences for loss of solids, and water absorption between the Fettuccine whole-grain pastas. The FU1 showed the highest loss of solids (10.05±0.90 g/100 g), which indicates that WF1 may not be suitable for Fusilli whole-grain pastas. Through this study, it was possible to obtain T. aestivum whole-grain flours from several milling methods and use those flours for whole-grain pastas production. The modification of milling processes of whole-wheat resulted in differences in cooking quality of long and short whole-grain pastas, and direct milling could be an alternative to reduce the loss of solids of these pastas.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!