To cite this paper use one of the standards below:
Since the first demonstration of broadband resonance-enhanced AFM-IR with Synchrotron Radiation at the MIRIAM beamline of Diamond in 2016 [1], the nanospectroscopy system has undergone significant technical developments and has been available to users in commissioning mode since January 2018. Continuous FTIR spectra are achieved with useful signal-to-noise in the 4000 – 800 wavenumber region at around 0.5 micron spatial resolution, limited by thermal diffusion and the modulation frequency of the SR beam, for soft materials like single biological cells and polymers [2]. A summary of recent results will be presented. Obtaining good quality data at rates required for IR nanoimaging, or for thin samples below a few hundred nm remains challenging in the current, normal incidence/bottom illumination geometry (shown in the figure) and investigations into the signal and noise performances will be discussed in comparison with theoretical expectations. Finally, planned future development of the instrument will be outlined. Optics adaptations will push towards theoretical performances and allow routine top or bottom illumination. A novel fast optical chopper, planned for implementation in autumn 2019, will allow access to higher cantilever resonances up to 200 kHz for higher spatial resolution, reduced thermal noise and greater spectral bandwidth below 500 wavenumbers.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper