Influência de Defeitos Randômicos Gerados sobre Pt(111) na Reação Oxidação de Etanol
The present work shows the characterization of the Pt (111) surface and their monoatomic defects generated electrochemically. The disordered surface obtained from (111) domains are carefully controlled and very atomically reproducible. After surface characterization the influences towards to ethanol oxidation reaction (EOR) in acid media was carried out using Cyclic Voltammetry (CV). The Figure 1A describes the evolution of the voltammetric profile of a Pt (111) electrode upon repeated cycling up to 1.3 V. However, the Pt (111) voltammogram recorded up 1.10 V is given as a reference of the initial state of the electrode. After several cycles, the voltammograms attain a stationary profile, markedly different from the initial one. The dominant feature is the peak at 0.12 V, which can be assigned to the presence of (110) defects sites on the surface. The Figure 1B shows the voltammetric profiles (forward scan) of four different disordered Pt (111) electrodes prepared by repeated cycles (e.g., Pt (111)-15, surface obtained after 15 CVs up to 1.3 V). Figure 1 C e D showed that the EOR is very sensitive to the modification of the surfaces during the first scan (black line). The features of voltammetric profiles for EOR (onset potential, peak potential and peak current density) change progressively from the well-ordered surface, Pt (111), to the totally disturbed one, Pt(111)-15 (Figure 1D). The CV obtained after about 5 cycles for Pt(111)-15 surface (blue line) change significantly, in this case the electrochemical behaviour is dominated by CO poisoning. The results demonstrated that the higher electrocatalytic activity (lower onset potential of ethanol oxidation and higher peak current density during the first scan) is achieved for totally disordered Pt(111)-15 surface. Therefore, conclude that this better performance be assigned to the larger number of (110)-type randomly defects on the Pt(111)-15 surface.