57005

Filmes finos de carbono processados a plasma para aplicação em células solares de Grätzel

Favoritar este trabalho

Nowadays, considerable attention has been directed to Grätzel solar cells or dye-sensitized solar cells (DSSCs) because of their low cost, environmental friendliness and easy assembly. Although platinum is the best material to catalyze the reduction of I3 - to I- in the solar cell counter electrode (CE), its high cost and scarcity hinders the large-scale production of DSSCs. Aiming to reduce the overall cost and at the same time keep the device performance, alternative materials such as carbon materials have been employed [1]. Based on these attempts, this research proposes a plasma texturing process in carbon CE in order to enhance their catalytic activity by changing their surface characteristics. First, the carbon thin films were deposited by magnetron sputtering and annealed at 600°C in vacuum. Then, these films have been submitted to a plasma surface treatment in a Reactive Ion Etching (RIE) reactor using SF6 and O2 gases and finally applied as a counter electrode for DSSCs. The carbon films were then investigated by scanning electron microscopy (SEM) and cyclic voltammetry (CV) at scan rates of 20, 50 and 100mV/s. In addition, efficiency measurements with a solar simulator under one sun illumination (100mW/cm²) and a solar cell active area of 1 cm² were performed. The SEM results showed the formation of surface nanostructures, leading to a relevant increase in its surface area, which is a desirable property. The carbon counter electrodes CV analysis revealed a comparable catalytic activity to that of platinum electrodes under the same experimental conditions and efficiency measurements showed a photovoltaic conversion efficiency (ƞ) of 2.07%, which is better than the CE without treatment (ƞ = 1.86%). From the commercial platinum CE the efficiency was 2.59%. These results indicate that plasmatreated carbon thin films have the potential to replace the platinum CE minimizing the conversion efficiency loss.