57075

Estudos de Estabilidade em Biossensores de Peroxidase de Raiz Forte sobre Monocamadas do Ácido 11-Mercaptoundecanoico

Favoritar este trabalho

11-mercaptoundecanoic acid (MUA) makes available self-assembled monolayers (SAMs) over gold surfaces. Amide bonds can be formed with the carboxylic groups of MUA molecules. Biological systems with MUA were built when it was positioned onto Au electrodes and transformed next in order to host aptamers [1]. The enzyme horseradish peroxidase (HRP) has been linked to SAMs to construct biosensors as well [2]. SAMs involving MUA were constructed onto Au electrodes and supported several biological structures including HRP [3]. Stability appears as one of the biosensors most interesting characteristics [2]. Cyclic voltammetry was used in the present work to study the stability of Au/MUA/HRP biosensors. Ag/AgCl/KCl, Au and Pt were utilized as reference, working and counter electrodes respectively. MUA depositions onto Au occurred from 1 mM solutions. N-hydroxysuccinimide 0.1 M and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride 0.1 M solutions in dimethyl sulfoxide activated the surface for 3 hours. 2 μL of a HRP 5 μM were placed onto the modified surface. H2O2 68 μM and phosphate buffer 100 mM solutions at pH 7 occupied the electrochemical cell in the beginning. Temperature was set at 25 °C. N2 was bubbled before measuring and an inactive atmosphere was preserved during measurements. Additions of phenol were worked out. These accretions cause a shift of the density of current values in the voltammograms. The linear response optimal range for phenol detection was found between 0 and 5 μM. Cathodic density of current at -0.21 V was plotted versus phenol concentration. Relative average slopes of the linear regressions were calculated and followed versus time. These slopes are associated to the biosensor stability. The maximum slope was registered for a recently prepared electrode. Less than the fifth part of the initial value was observed after 20 h. The sensibility of the biosensor was zero two days later. This absence of stability might be explained considering an overexposure of HRP to the solution. Perhaps it could be minimized when covering HRP with a less polar environment.