57053

Estudo do líquido iônico ácido C2AC4S.BF4 em eletrodos de Au (111) e HOPG

Favoritar este trabalho

The ionic liquids (ILs) or molten salts at room temperature are promising electrolyte materials for electrochemical devices owing to tend to present unusual chemical and physical properties. Although ILs possess favorable properties for use as electrolytes in capacitors, lithium batteries, fuel cells, solar cells and water electrolysis. But the electric double layer (EDL) structure at molecular level is still not well understood. The EDL is generally complicated by various conformations of ILs, ionic correlations, specific adsorption, and temperature. The EDL structure of ILs is often experimentally probed using electrochemical impedance spectroscopy (EIS). The Tafel experiments reveal the reaction mechanism and the rate-determining step (rds) of the electrochemical process at the solid−liquid interface. However, great uncertainties often arise in interpreting the experimental kinetic data, which are related to the empirical parameters intrinsic to the Tafel equation and also the complexity of reactions occurring on the electrode. On the other hand, high-resolution in-situ scanning tunneling microscopy (STM) have been applied to study and characterization of the interfacial structure and of the different processes occurring therein. In this study, the 3-triethylammoniumbutanesulfonic acid tetrafluoroborate ionic liquid (C2AC4S.BF4 IL) aqueous solution on highly oriented pyrolytic graphite (HOPG) and gold (Au (111)) electrodes was investigated. For the HER through of 0.1M C2AC4S.BF4 IL aqueous solution (pH = 1.0), using Au and HOPG as cathode, the values of Tafel slopes are, consequently, b = 83.0 mV dec-1 and 71.9 mV dec-1, which indicates unusual values. These values can be attributed to the effect of diffusion on the cathode surface of the metallic sites where H+ is reduced and chemically desorbed, indicating that the Volmer step (electro-adsorption and reduction) is in quasi-equilibrium with the chemical desorption step (Tafel step). Volmer: H+ + e- + M +-> MHads(1). Tafel: 2 MHads -> 2M + H2 (2). In the case of H2SO4 aqueous solution (pH = 1.0) on Au (111) and HOPG, the values of Tafel slope are 131.2 mV dec-1 and 97.5 mV dec-1 on Au (111) and 106.1 mV dec-1on HOPG, respectively. These results indicate that the determinate step is Tafel or adsorption of H+ in the electrode. In the case of Au, it is possible observed two slopes, one in low potential and another slope in high potential2. In this paper, Tafel parameters were studied for C2AC4S.BF4 IL aqueous solution on HOPG and Au (111) and compared with H2SO4 aqueous solution.