Eletrooxidação do alaranjado de metila via processo fotocatalítico utilizando nanopartículas de Fe3O4
The Advanced Electrochemical Oxidation Processes based on the hydrogen peroxide (H2O2) electrogeneration are a viable technology and have been applied for the remediation of effluents containing synthetic dyes. Among these processes, stand out the electro-Fenton (EF) process using nanoparticles (NPs) of iron oxide1. This process is effective, since it is occurs the production of ●OH. Thus, this work describes the electrodegradation of methyl orange (MO) in acid medium (K2SO4 0.1 mol L-1, at pH 2.5) by photocatalytic process using Fe3O4 NPs. The Fe3O4 NPs were synthesized by co-precipitation method and characterized by XRD and TEM analysis. The experiments of H2O2 electrogeneration and oxidation of MO were performed in a single compartment electrochemical cell composed of reference electrode (Ag/AgCl), Rh counter electrode and a glassy carbon was used as working electrode. The applied potential for H2O2 electrogeneration was -0.3 to 1.3 V (vs. Ag/AgCl). For the photolysis experiments was used a mercury vapor lamp of 250 W. Aliquots of the dye solution were collected at specific times and analyzed by spectrophotometry UV/Vis. The concentration of electrogenerated H2O2 after 90 min. of electrolysis was 21.6 mg L-1 at -1.3 V (vs. Ag/AgCl).