57267

Eletroconversão do Glicerol em Meio Alcalino: da Geração de Energia à Formação de Produtos de Valor Agregado

Favoritar este trabalho

Among different alcohols being tested in polymer electrolyte membrane fuel cells, recent efforts have being made to the development of glycerol-based devices[1]. The application of this alcohol in fuel cells aim to address the existing concern about the large amount of glycerol being generated as a waste byproduct of biodiesel production. In fuel cells, glycerol can be electrocatalytic converted into electrical energy through the oxidation of its hydroxyl groups, or it can also be used forthe electrosynthesis of value-added products with industrial application.Based on this background, the focus of this work is to investigatetheglycerol electroconversionin alkaline medium using bimetallic nanocatalysts M50@Pt50 kind (where M = Ru, Sn or Ni) supported ontomulti-walled carbon nanotubes. The electrocatalysts were synthetized via an electrostatically oriented co-reduction method[2], in which the desired nanocatalysts morphology was achieved by self-assembly of the positively charged metal species (Sn, Ni,and Ru) into the internal catalyst level and the negatively charged platinum species towards the outer layer. The physical-chemical characterization have confirmed both the atomic ratios and the metal loading,showingspherical nanoparticles/nanoagglomerateswith a particleaverage diameter between 2 to 3 nm. In terms of electrochemical performance, the Ni@Pt composition displayed the higher electrochemically active surface area, the best relation between peak current and the onset oxidation potential in the presence of glycerol (275 mA mg-1Ptand -492 mV vs. Hg/HgO/OH-), and remarkable electrochemical stability in chronoamperometric tests. Long-term glycerol oxidation experiments and products formation analysis indicated that the different synthetized electrocatalysts lead to good glycerol electroconversion rate as well as to the formation of value-added products. For electrosynthesis purposes, however, a more appropriate choice of the electrolysis conditions is required in order to perform a preferred route of glycerol electrooxidation, achieving a selective alcohol electro-oxidation.