Efeito do envelhecimento da solução de hidrólise na proteção contra a corrosão de um revestimento híbrido aplicado sobre e liga AA2524 anodizada em TSA
Anodizing is largely employed in the aerospace industry to protecthigh strength Al alloys from corrosion. The particular morphology of the anodized oxide, consisting of a porous and a barrier layer, provides both an excellent base for applying protective organic coatings and corrosion protection. Traditionally, the processis performed in chromate containing electrolytes. However, since the beginning of the 1990s, industrial applications involving these chemicals are being subjected to severe restrictions [1]. Tartaric-sulfuric acid(TSA) anodizingis among the new environmentally friendly processes designed to substitute chromate based-ones. Nowadays, TSA anodized parts are already being used by Airbus in its aircrafts[2]. Securities requirements of the aerospace industry impose that the porous layer must be further sealed and topped by an organic coating. When corrosion resistance is a major requirement, this former procedure is also performed insolutions with hexavalent chromium[1]; therefore, it must also be banished. Apromising approach for sealing the porous layer is by means of hybrid organic-inorganic sol-gel coatings produced by hydrolysis and condensation of alkoxysilanes. The hydroxyl moieties of the hydrolysed molecules bond to the metal surface, where as the organic part can be tailored to interact with the organic coating forming a dense protective layer. One of the main concerns about industrial scale-up of the sol-gel technologyis the stability of the hydrolysis solution, as excessive condensation form disordered structures, which may turn into preferential path ways for aggressive species penetration. This work investigates by means of electrochemical impedance spectroscopy (EIS) the effect of hydrolysis solution ageing on the corrosion protection of a sol-gel hybrid coating applied to a TSA anodized AA2524. Fourier Transform Infrared (FTIR) and rheology determination were used to access the stability of the hydrolysissolution, where as the EIS diagrams were fitted with equivalent circuits. The results showed excellent corrosion protection properties of the sol-gel coating even after 336 h of ageing of the hydrolysis solution.