Efeito do ânodo de Ti/IrO2 no tratamento de águas fenólicas pelo proceso de oxidação eletroquímica
Phenolic compounds, usually present in olive mill wastewaters (OMW), are biorecalcitrant substances and thus not prone for biological degradation. Therefore, the use of the electrochemical oxidation (EO) process arises as a promising alternative to depurate effluents containing these compounds. The EO is considered as an environmentally friendly and safe technology. In this context, the main goal of this work is to achieve the best correlation between different operating conditions, such as nature (NaCl and Na2SO4) and electrolyte concentration (1.8-20 g L-1), current density (57-119 mA cm-z) and initial pH (3.4-9) using Ti/IrO2 anodes, in order to depurate phenolic wastewaters mimicking olive mill effluents. The phenolic content (TPh) and chemical oxygen demand (COD) removals were expressed as a function of applied charge and over time. According to the results, the optimal operating conditions were 10 g L-1 of NaCl, current density of 119 mA cm-2 and initial pH of 3.4, leading to 100 % of TPh and 84.8 % of COD removals. Under these conditions, the surface of the electrode was analysed by SEM, being observed some morphological differences after treatment. The toxicity of the synthetic effluent was also tested in neuronal activity using rat brain slices. A smaller interference of the treated effluent was verified when compared to the raw one regarding synaptic activity which is positive. Also, upon removal of the treated effluent the signal becomes potentiated. A certain amount of potentiation is considered to be beneficial since it may be associated with cellular plasticity involving cellular learning and memorization. In addition, the depuration of a real OMW was also addressed under the optimized conditions, being attained a total and 62.8 % of TPh and COD removals, respectively. This study reveals that this EO apparatus and conditions can be applied as a pretreatment process of an actual olive mill effluent.