Compósitos à base Platina suportada em Carbono/Carbetos Bimetálicos de molibdênio para a Reação de Redução de Oxigênio
The large-scale development offuel cells (FCs) is actually delayed by the lack of cheap, proper catalysts, especially for the cathodic oxygen reduction reaction (ORR). Nowadays, Platinum and platinum-based materials are the best electrocatalysts, but these materials are scarce and expensive. In the search for better catalysts, the development of new support materials for noble metal catalyst nanoparticles [1–3] is commonly attempted. In this work, nanocomposites of bimetallic molybdenum carbides: Fe3Mo3C, Co3Mo3C/Co6Mo6C and Ni6Mo6C supported on carbon were synthesized by a temperature programmed reduction method. Incorporation of Pt nanoparticles was carried out by using glycerol as reducing agent in a microwave oven. All produced materials were characterized by X-Ray diffraction (XRD), Scanning (SEM) and Transmission (TEM) Electron Microscopy, Energy Dispersive X-Ray (EDX) analysis and Cyclic Voltammetry (CV). All bimetallic carbides-Pt/C composites show lower H2O2 production and enhanced ORR activities and stabilities relative to commercial Pt/C in acidic media. Nevertheless, contrarily to past reports [1-3], the bimetallic carbide component of composites is already oxidized at potentials > ~ 0.7 V. Therefore, any improvement in the ORR because of the bimetallic carbide-derived support should be related to the resulting surface after carbide oxidation, that is, a favorable interaction between TM-MoxOy species, TM = Fe, Co or Ni, and Pt, rather than any synergistic effect between Pt and bimetallic carbidic compounds.