Bioadsorção de Cromo (III) Utilizando Carvão da Pachira Aquatica Aubl

Vol 11, 2022 - 159294
Pôster
Favoritar este trabalho
Como citar esse trabalho?
Resumo

Produced water is the largest effluent generated during oil extraction, being a complex mixture of organic and inorganic substances in high concentrations. Heavy metals offer great risks to the environment due to their ability to accumulate along the food chain causing public health problems and severe damage to the ecosystem. Biosorption has been gaining ground in the literature for using agro-industrial and forestry residues as bioadsorbents, a sustainable way of treating effluents, being able to capture various contaminants present in a fluid phase without using chemical additives, making the technology cheap, effective, simple and with regeneration capacity of the saturated biosorbent. Thus, in this work, a charcoal was developed from Pachira Aquatica Aubl to be applied as a biosorbent in the removal of chromium ions in a synthetic effluent composed of several metallic ions. Charcoal was characterized by analytical techniques such as: immediate analysis, Boehm titration, Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) to identify the surface properties of charcoal. Then, the material was subjected to adsorption tests in a finite bath to determine the influence of the biosorbent mass and the contact time on the removal of Cr(III) in a multielement solution. The adsorption kinetics and the equilibrium isotherm were evaluated by some mathematical models available in the literature. The FTIR and the Boehm Titration showed the presence of organic functional groups, as well as pores and porous channels on the surface of the coal through the SEM, contributing to the mass transfer and the interaction between the biosorbent and the fluid. These properties favor the adsorption process between metals such as chromium in aqueous solution and the surface of the biosorbent. The percentage of removal of Cr(III) ions in solution was greater than 89% for dosages of 10 g/L of biosorbent and 100% for dosages above this value. The equilibrium time found was 300 minutes for the kinetics experiments and the experimental data were better suited to the intraparticle diffusion model. While for the isotherm, the Langmuir model obtained the best correlation, showing that the adsorption probably occurs in a monolayer and with a limited number of sites. Therefore, CPA charcoal is effective to remove about 40 ppm of chromium ions in multi-element effluents such as produced water.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Universidade Federal do Rio Grande do Norte
Eixo Temático
  • Meio Ambiente, Saúde, Segurança e Sustentabilidade
Palavras-chave
Bioadisorção
Cromo III
Aubl