Para citar este trabalho use um dos padrões abaixo:
The search for sustainable packaging materials has driven the development and use of biopolymers from renewable sources. In this context, taioba starch (Xanthosoma sagittifolium L.) stands out as an unconventional source, while beet stalk (Beta vulgaris L.), an agri-food by-product rich in betalains, has potential for application in the development of smart packaging materials. Thus, this study aimed to develop and characterize taioba starch (TS) and collagen (CG) films incorporated with different concentrations of beet stalk extract (BSE), evaluating their optical properties. For this purpose, beet stalk (BS) samples were donated by the Zé Miúdos Cooperative and transported to the Federal University of Minas Gerais. The samples were washed with potable water, disinfected with sodium hypochlorite, frozen at −20 °C, and subsequently lyophilized at −46 °C for 72 h. After lyophilization, the material was ground and sieved through an 80-mesh sieve. The extracts were prepared by diluting 1 g of BS in 10 mL of distilled water. The films were produced by casting using a completely randomized design, with five formulations and three replicates, containing (F1) 0, (F2) 1.5, (F3) 3, (F4) 4.5, and (F5) 6% BSE, while maintaining constant concentrations of TS (3.3 g·100 g⁻¹), CG (2.1 g·100 g⁻¹), and glycerol (40 g·100 g⁻¹ of TS/CG). Instrumental color parameters (L*, a*, and b*) were measured using a colorimeter according to the CIE Lab*. The color parameters demonstrated that the incorporation of BSE influenced the optical characteristics of the films, with significant differences observed during storage (p < 0.05). Luminosity (L*) decreased from 92.94 in the control (F1) to 89.03, 85.31, 80.90, and 82.19 in F2, F3, F4, and F5, respectively, indicating a progressive reduction in film luminosity with increasing extract concentration. The a* parameter increased from 2.37 in F1 to 4.70, 7.47, 9.75, and 10.48 in F2, F3, F4, and F5, respectively, indicating an intensification of the red component, particularly at higher extract concentrations. The b* values remained negative, ranging from −10.39 (F2) to −5.30 (F4), compared with −8.55 in the control, indicating a predominance of the blue component. The increase C* from 8.88 in F1 to 11.42, 10.99, 11.39, and 12.84 in F2, F3, F4, and F5, respectively, indicated greater color intensity in the formulations containing beet stalk extract. The h* also shifted from 285.46° in F1 to 294.62°, 312.86°, 328.52°, and 324.89° in F2–F5, respectively. These results demonstrate that the natural pigments present in beet stalk, particularly betalains, modified the chromatic profile of the films, highlighting their potential application as smart packaging materials. In addition, the use of beet stalk and taioba starch contributes to the valorization of underutilized raw materials and agri-food by-products, integrating innovation, sustainability, and circular economy principles.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo