PHENOLIC ENRICHMENT AND ANTIOXIDANT POTENTIAL OF 3D-PRINTED GLUTEN-FREE SNACKS CONTAINING EXTRUDED PERUVIAN PURPLE MAIZE COB FLOUR

Vol.2, 2025 - 348408
In-person poster presentation
Favoritar este trabalho
Como citar esse trabalho?
Resumo

Purple maize cob is an underutilized byproduct rich in phenolic compounds. Thermoplastic extrusion can enhance their extractability and improve flour structuring properties, supporting its valorization in 3D-printed foods. This study evaluated bioactive enrichment, antioxidant capacity, and printability in gluten-free snacks prepared with an extruded purple maize grain–cob composite flour (1:1; EPC), considering technological attributes relevant to its incorporation. The blend was processed in a twin-screw extruder at barrel temperatures of 70, 100, 130, and 150 °C and a screw speed of 210 rpm. Formulations were prepared by replacing rice flour with EPC at 0, 10, 20, 30, 40, and 50%, alongside a rice-flour control containing 3% xanthan gum (control). Snacks were printed using a Foodini printer in five shapes (star, triangle, spiral, hexagon, and flower) with a 1.5 mm nozzle and subsequently baked at 120 °C for 15 min. Total polyphenols, flavonoids, anthocyanins, and ORAC antioxidant potential were evaluated, together with pasting properties, geometric printing accuracy, and firmness. Compared with the control, EPC incorporation increased polyphenols by up to 6162.5% (13.84 → 866.73 mg gallic acid equivalents/100 g d.b.), flavonoids by up to 631.2% (17.56 → 128.39 mg catechin equivalents/100 g d.b.), and ORAC by up to 1483.7% (215.94 → 3419.86 mg Trolox equivalents/100 g d.b.). Maximum polyphenol and ORAC values occurred at 50% EPC, whereas maximum flavonoid content occurred at 40% EPC. Anthocyanins, undetected in the controls, reached 62.95 mg cyanidin-3-glucoside equivalents/100 g d.b. at 50% EPC. This enrichment is consistent with the phenolic contribution of the purple maize cob and grain (Lao and Giusti, 2018; Salvador-Reyes et al., 2023). Compound release through cell disruption during extrusion may enhance extractability (Jin et al., 2020). All formulations were printable, and 20–30% EPC favored contour retention, with geometric descriptors close to those of the xanthan-gum control. This behavior may be related to the balance between hydration, rheology, and shape retention described for extruded flours (Quispe Santivañez et al., 2025). Integrating extrusion and 3D printing enabled purple maize cob valorization in snacks enriched with bioactive compounds, balancing antioxidant capacity and geometric definition through the incorporation level.

Funding: This research was funded by Universidad Tecnológica del Perú (project P-2025-LIM-11) and the Spanish National Research Council (CSIC) through the I-COOP 2025 call (grant COOPB25083), with support from ICTAN-CSIC.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Programa de Doctorado en Ingeniería Agroindustrial Mención Transformación Avanzada de Granos y Tubérculos Andinos, Universidad Nacional del Santa
  • 2 Universidad Nacional Autónoma Altoandina de Tarma
  • 3 Universidad Tecnológica del Perú
  • 4 Instituto de Ciencia y Tecnología de Alimentos y Nutrición | (Institute of Food Science, Technology and Nutrition)
  • 5 Universidad Nacional del Santa
  • 6 Faculty of Food Engineering, UNICAMP, Brazil
  • 7 Universidade Estadual de Campinas (UNICAMP)
Eixo Temático
  • Innovative Processing of Bioactive Compounds - (IP)
Palavras-chave
Phenolic compounds
Anthocyanins
Antioxidant capacity
Purple maize
3D food printing