Para citar este trabalho use um dos padrões abaixo:
The use of biopolymers such as sodium alginate has stood out in the development of active biodegradable packaging, aiming to reduce the environmental impact of conventional plastics. The incorporation of agro-industrial residues, such as guarana husk, emerges as a strategy to confer functional properties. This work aimed to evaluate the effect of incorporating different concentrations of guarana husk extract (1.0% v/v and 1.5% v/v) on the mechanical properties of sodium alginate films. The extract was obtained via Ultra-Turrax-assisted extraction (12,000 rpm, 15 min), followed by vacuum filtration and solvent evaporation. Three groups of films were prepared: control (FC), with 1.0% (F1), and 1.5% (F15) of guarana husk extract. The films were characterized for their tensile properties using a texture analyzer (Stable Micro Systems, TA.TX2+), in accordance with ASTM standard D882-91. Young's modulus (YM), tensile strength (TS), and elongation at break (EB) were determined. Film F1 showed the highest Young's modulus (MPa) and the highest tensile strength (MPa), suggesting that the addition of 1% extract promoted reinforcement in the polymeric matrix, possibly due to intermolecular interactions between the phenolic compounds of guarana and the alginate network. In contrast, formulation F15 showed YM (MPa) and TS (MPa) values lower than those of F1, resembling the control group. This behavior indicates a possible discontinuity in the polymeric matrix or saturation of components at higher extract concentrations, which compromises mechanical integrity. Regarding elongation at break (EB), group F1 maintained flexibility comparable to the control, while F15 exhibited a reduction (~15.7%), corroborating the loss of structural properties at higher additive concentrations. The incorporation of 1% guarana husk extract optimized the mechanical properties of the alginate films, resulting in a stiffer material that is more resistant to tension. However, increasing the concentration to 1.5% showed no structural benefits, indicating the existence of a concentration limit for effective interaction between the extract and the alginate matrix. These results are promising for the development of bioactive packaging, with F1 being the most indicated formulation from a mechanical perspective.
The authors acknowledge the Graduate Program in Food Technology (PPGTA) of the Federal Technological University of Paraná (UTFPR), Campo Mourão campus, and the National Council for Scientific and Technological Development (CNPq). CNPq Call Nº 49/2024 – Junior Postdoctoral Fellowship – PDJ 2024, process Nº 151797/2025-0, and CNPq Research Productivity Fellowship (302986/2025-1).
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo