16511

Ascorbic acid as an auxiliary to enhance coagulation for turbidity and TS removal from greywater

Favoritar este trabalho

In this study, the coagulation process is evaluated in treatment of greywater on the basis of transient analysis of decanting material for removal efficiency. Parameters such as conductivity, turbidity and total solids (TS) were recorded. Alum-coagulation, Iron- coagulation and Iron-NH4 enhanced with ascorbic acid were used on the samples that were synthetically prepared and treated in reactors at ambient temperature to meet the Brazilian water quality discharge limits or to be reused. A series of jar test experiments was run at 150 rpm for 2 min and 30 min for settling. 95 mg/L dose of traditional coagulant (alum, iron or iron-NH4) was applied at pH ranging from 4-10 at room temperature. The coagulation was enhanced by adding doses of acid resulting in three concentrations: 2.38, 7.14 and 11.9 g/L. Raw and coagulated greywater samples were analyzed for their turbidity, TS and conductivity.