Para citar este trabalho use um dos padrões abaixo:
The flash point (FP) is a physical property defined as the lowest temperature observed for the ignition of vapors of a flammable liquid in presence of air, corrected to 101.3 kPa. This parameter is critical for evaluating the fire and explosion risks of liquid fuels, and for the development of alternative fuel blends. This study aims to investigate the FP of hydrocarbon + methyl ester and hydrocarbon + biodiesel blends by means of experimental measurement and thermodynamic modeling. Experimental FP data was obtained for different blend compositions. The non-ideality of the mixtures was calculated using NRTL, UNIQUAC, and UNIFAC models. The results indicate that deviations from ideal behavior are more pronounced. Among the models evaluated, NRTL demonstrated the most accurate FP description, with Absolute Deviation (AD) ranging from 0.09 to 0.35 K, and the Root Mean Square Deviation (RMSD) was between 0.11 and 0.47 K. The UNIFAC predictive model also showed interesting results in estimating the FP values for mixtures of methyl esters + hydrocarbons, with AD ranging from 0.30 to 1.19 K, and RMSD less than 1.48 K. The characterization of the biodiesels used in this study provided information on their chemical composition, revealing the predominance of some specific methyl esters (FAMES): methyl palmitate, stearate, oleate, linoleate, and arachidate. Based on these compositions, the FP of the FAME mixtures, as a biodiesel surrogate, with a hydrocarbon were calculated as an Ideal solution and using the UNIFAC model to describe the non-ideality. The results for the Ideal model showed AD values varying from 1.01 to 4.84 K, and RMSDs between 1.51 to 6.27 K, while for the UNIFAC model, the AD values ranged from 0.69 to 3.89 K, and RMSDs between 0.80 and 5.06 K, depending on how detailed the composition of biodiesel was.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo