Thin Films of Carbon Nanomaterials with Molybdenum Disulfide for Batteries

Vol 1, 2022 - 155015
Poster Autoorg
Favorite this paper
How to cite this paper?
Abstract

There is a noticeable increase in the development of materials to be used as electrodes in novel metal-ion batteries, such as sodium and potassium ion batteries (SIBs and KIBs, respectively). Both are cheaper and safer when compared to the Li-based similar ones.[1,2] Molybdenum disulfide (MoS2) presents properties to apply as battery electrodes, such as large surface area and spacing between layers.[2] However, the low electronic conductivity and changes in material volume during charge/discharge (C/D) decrease its electrochemical performance.[2] Nanocomposites with carbon nanomaterials such as graphene (rGO) and carbon nanotubes (CNTs) can solve this problem. We present here the preparation of several thin and transparent films, first between MoS2/CNTs, based on the liquid-liquid interfacial route (LLIR) developed in our research group[3–5], in which a thin film of materials self-organizes at the interface between immiscible liquids. Also, ternary nanocomposites between MoS2, rGO and copper oxide nanoparticles (CuxO) were obtained based on in situ chemical reactions at the L/L interface. All materials have been characterized and studied as anodes for the aqueous battery: MoS2/CNT for KIBs and MoS2/rGOCuO for SIBs. High specific capacity (SC) values have been found, of 517 mA h g-1 for KIBs, and the impressive 1316 mA h g-1 for the MoS2/rGOCuO nanocomposites produced “in situ”. The high SC values are due to the synergistic effect of nanocomposites. The CNTs/rGO absorb the mechanical stress of MoS2 during the CD process, making the films more flexible and increasing the electronic conductivity. Finally, the final SC of the ternary compounds is higher than the theoretical SC of MoS2 (669 mAh g-1) due to the presence of CuxO, which actively contributes to the CD process and significantly increases these values.
References
[1] S. Husmann, M.K. Ramos, A.J.G. Zarbin, Electrochim. Acta 422 (2022) 140548.
[2] A. Schmidt, M.K. Ramos, et. al, Electrochim. Acta 387 (2021) 138500.
[3] C.M. Ferreira, M.K. Ramos, A. Zarbin, Eur. J. Inorg. Chem. 2021 (2021) 3373–3384.
[4] M.K. Ramos, A.J.G. Zarbin, Appl. Surf. Sci. 515 (2020) 146000.
[5] A. Schmidt, M.K. Ramos, et. al, Electrochem. Commun. 134 (2022) 107183.

Institutions
  • 1 Universidade Federal do Paraná
Track
  • AUTOORG - 7th Meeting on Self Assembly Structures in Solution and at Interfaces
Keywords
Thin films
Carbon nanomaterials
Molybdenum disulfide